Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Clean Espresso Machine Breville

How to Clean Espresso Machine Breville

Share This Article

Introduction:

Today I will teach you How to Clean Espresso Machine Breville. Keeping your Breville espresso machine clean is essential for maintaining its performance and ensuring that every cup of coffee you brew is a delightful experience. Whether you’re a seasoned barista or a coffee enthusiast, proper maintenance ensures consistent flavor and extends the lifespan of your beloved espresso machine.

In this comprehensive guide, we’ll walk you through the steps for both quick daily cleaning and occasional deep cleaning. From disposing of the coffee puck to descaling the internal components, we’ve got you covered. Let’s dive in and learn how to keep your Breville espresso machine in top shape!

1. Quick daily cleaning:

How to Clean Your Breville Espresso Machine

a. Dispose of the Puck:

After brewing an espresso shot, remove the portafilter and discard the used coffee grounds (puck). It’s easier to clean them while they’re still warm.

The 20 Best Espresso Accessories and Tools Box for Cleaning.

b. Clean the portafilter:

Rinse the portafilter under running water for a few seconds. Wipe it dry with a clean towel. Ensure that your tamper is also clean and dry.

c. Rinse the group head:

Remove the portafilter and run a “blank shot” (no coffee grounds) through the group head. This helps remove any lingering coffee residue and oils.

d. Clean the Steam Wand:

After milk texturing, purge the steam wand by releasing a little steam into a towel. Wipe down the wand with a damp cloth to remove any milk residue.

2. Deep Cleaning (Occasional):

a. Prepare the cleaning solution:

  1. Power on your Breville espresso machine.
  2. Mix the cleaning solution according to the instructions on the packaging.

b. Run the solution through the machine:

  1. Replace the portafilter with a blind filter (a filter without holes).
  2. Brew the cleaning solution as if you were making espresso. Let it run through the group head and portafilter.
  3. Repeat the process a few times to thoroughly clean the internal components.

c. Rinse with plain water:

  1. After the cleaning cycle, remove the blind filter.
  2. Run plain water through the machine to rinse out any remaining cleaning solution.

Additional Tips:

  • Clean the drip tray and water reservoir:
    • The water reservoir and drip tray should be routinely removed and cleaned. Empty and rinse them to prevent mold or bacteria growth.
  • Descale the machine:
    • Use a descaling solution periodically to remove mineral deposits from the internal parts.
  • Wipe the exterior:
    • Wipe down the machine’s exterior with a damp cloth to keep it looking clean and shiny.

Remember that proper maintenance ensures consistent flavor and extends the lifespan of your Breville espresso machine. Happy brewing.

Descaling your Breville espresso machine is crucial to maintaining its performance and ensuring the best-tasting coffee. Here are step-by-step instructions for descaling your Breville espresso machine:

Descaling your Breville espresso machine
  1. Prepare the descaling solution:
    • Empty the drip tray and water tank.
    • Dissolve one packet of Breville’s descaling solution (or use a 25% distilled white vinegar and 75% water solution) with warm water.
    • Carefully pour the descaling solution into the water tank.
  2. Enter Descaling Mode:
    • Press and hold the power button and the 2-cup button simultaneously.
    • Wait for the machine to heat up and indicate readiness.
  3. Descale the coffee component:
    • Place a 2-liter container under the group head.
    • Press the 1-cup button to start descaling the coffee component for 25 seconds.
    • You can stop it earlier by pressing the button again.
  4. Descale the Steam component:
    • Turn the steam dial left to descale the steam component for 13 seconds.
    • Then turn the dial to standby.
  5. Descale the hot water component:
    • Turn the steam dial right to descale the hot water component for 8 seconds.
    • Again, stop it by turning the dial to standby.
  6. Repeat the process:
    • Use the remaining descaling solution in the tank to repeat the previous steps.
  7. Rinse the machine:
    • After giving the water tank a thorough rinse, fill it up with new water.
    • Repeat the steps to rinse the machine and remove any residue.
  8. Exit Descaling Mode:
    • Press the power button to quit the descaling mode.
    • Turn off the machine.

Remember to follow these steps periodically to keep your Breville espresso machine in top shape. 

Leave a Reply

Your email address will not be published. Required fields are marked *